Can I put 390 heads on a 360?
The casting number of those heads ends with 291-C and they are one year only for the 1970 390. 68/69 390 heads will not fit because the ports are square rather than the 1970+ dog leg ports. FYI, in 1970+ motors the 360 and 390/401 heads are identical, at least in 4 barrel applications.
Whats the difference between a 360 and 390?
The bore size is the same between a 360 and a 390, but the stroke in a 390 is larger by a small amount, about 0.29 inches (7.24 mm). Also, in trucks, the 360 usually had a Holley 4 barrel carburetor, whereas the 360 came equipped with a Ford 2 barrel carburetor.
Are 360 and 390 blocks the same?
They are the same block, heads, everything except the crank, rods and pistons. You can usually stick a wire down a plug hole and get a measurement from bdc to tdc–3.5 for the 360, 3.784 for the 390.
Are 352 and 390 heads the same?
The only difference between a 390 and 352 is bore and stroke, the blocks are more or less identical, and quite often Ford would put the same heads on them.
How much horsepower does a Ford 352 have?
The only difference between a 390 and 352 is bore and stroke, the blocks are more or less identical, and quite often Ford would put the same heads on them.
How much horsepower does a Ford 360 engine have?
The Ford 360 engine is a V8 engine created between 1968 and 1971 with two barrels had 215 horsepower at 4,400 rpm and a max torque of 327 at 2,400 rpm. The later model, which ran from 1972 until 1975, had 196 horsepower at 4,000 rpm and 327 max torque.
How much horsepower does a 390 Ford engine have?
The Ford 360 engine is a V8 engine created between 1968 and 1971 with two barrels had 215 horsepower at 4,400 rpm and a max torque of 327 at 2,400 rpm. The later model, which ran from 1972 until 1975, had 196 horsepower at 4,000 rpm and 327 max torque.
What is the horsepower of a Ford 390?
The 390 cu in (6.4 L) 2v is rated at 265 bhp (197.6 kW) @ 4,100 rpm, while the 4v version was rated at 320 bhp (238.6 kW) @ 4,100 rpm in certain applications. Certain 1967 & 68 Mustangs had 390 4v engines rated at 335 horsepower (250 kW), as did some Fairlane GTs and S code Mercury Cougars.
What does FE stand for on Ford Motors?
The 428, a long-stroke FE derivative, lived from 1966 to 1970. FE (which means “Ford Engine,” not Ford-Edsel, nor Ford Engineering) variety comes from a broad selection of bore and stroke sizes to achieve cubic-inch displacements. The 332 and 352 are fraternal twins, virtually identical engines with 4.00-inch bores.
How do I identify a Ford 390 engine?
The 390 is a common FE engine, first introduced in 1961 and produced through 1971 for autos and 1976 for trucks. Begin by identifying the block as an FE and then compare the casting number to a listing of known 390 numbers. If this doesn’t work, measuring the bore and stroke is necessary.
How do you tell if I have a 390?
The 390 is a common FE engine, first introduced in 1961 and produced through 1971 for autos and 1976 for trucks. Begin by identifying the block as an FE and then compare the casting number to a listing of known 390 numbers. If this doesn’t work, measuring the bore and stroke is necessary.
How do you tell the difference between a 352 and a 390?
Measure the distance between the two marks. For those that don’t know: 3.98 is the stroke for the 410 and 428 engines; 3.78 is the stroke for the 390, 406 and 427 engines and 3.5 is the stroke for the 352 and 360 engines. Hope this helps!
Is a 360 FE a big block?
The FE 360 Big-Block under the hood has never functioned well. It’s a heavy engine, topped off by a bulky, cast-iron intake manifold. It gets worse. In 1973, emissions equipment was in its infancy, and cut out more power than it did emissions.
References:
- https://theamcforum.com/forum/will-390-heads-on-a-360_topic70279.html
- https://itstillruns.com/tell-ford-360-ford-390-6140299.html
- https://www.ford-trucks.com/forums/1080505-telling-a-360-from-a-390-a.html
- https://www.jalopyjournal.com/forum/threads/390-heads-on-a-352.943813/
- https://www.motortrend.com/features/super-rare-superstar-1960-ford-starliner-360hp-high-performance-v-8/
- https://www.vehiclehistory.com/articles/ford-360-engine-options-size-specs-and-more
- https://junkyardmob.com/guides/ford-390-big-block
- https://en.wikipedia.org/wiki/Ford_FE_engine
- https://www.motortrend.com/how-to/15999-fe-quick-facts/
- https://itstillruns.com/identify-ford-390-block-7448400.html
- https://www.youtube.com/watch?v=Z-VR1jLFreE
- https://www.ford-trucks.com/forums/251074-difference-between-a-390-and-a-352-a.html
- https://www.motortrend.com/how-to/1103or-fe-360-big-block-engine-revival/